ADI Pro Rewards
Filter Results
Showing 617 - 644 of 5500
content loaded
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
More Options Available
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
H365RA-IV|FL-H365RAIV
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
BAT-12180-BP|FL-BAT12180
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
5601AFL-5601A
Key Features
- Easy to Read Alphanumeric Identification of Detector Type and Temperature Rating
- Reversible Mounting Bracket for Flush and Surface Mount Installations
- Low Profile Design to Coordinate with Room Aesthetics
Sign In for Dealer Pricing
Sign In for Dealer Pricing
ES-50XC-FRFL-ES50XCFR
Key Features
- Pre-installed IPOTS-COM Ethernet IP and POTS (Plain Old Telephone Service) Central Station Communicator
- Auto-programming (learn mode) reduces installation time. Reports two devices set to the same address
- Two independently programmable, built-in Style Z (Class A) or Style Y (Class B) NAC circuits
Sign In for Dealer Pricing
Sign In for Dealer Pricing
ANN-LEDFL-ANNLED
Key Features
- ANN-LED connects to the ANN-Bus terminal on the FACP and required minimal programming
- Includes three LEDs for each zone Alarm, Trouble, and Supervisory
- Can be remotely located up to 6,000' (1,829 m) from the panel
Sign In for Dealer Pricing
Sign In for Dealer Pricing
ANN-SECFL-ANNSEC
Key Features
- Used only with firmware 3.0 or higher on MS-9050UD(E) Fire Alarm Control Panel with DACT
- Optional secondary ANN-BUS interface module
- The ANN-SEC comes with all hardware required to mount to the Control Panel
Sign In for Dealer Pricing
Sign In for Dealer Pricing
PRODCMPRODCM
Key Features
- Dialer operation is set for DTMF Tone Dialing for each phone number (pulse dialing is not supported and must be disabled in the control panel)
- PABX field is disabled (the Dialer Capture module does not co mmunicate through a PABX)
- Phone numbers and account numbers are programmed (to ensure the maximum number of messages can be transmitted to the central station before a communication failure occurs, ensure the control panel is programmed with a primary and secondary central station number)
Sign In for Dealer Pricing
Sign In for Dealer Pricing
ANN-100FL-ANN100
Key Features
- Approved for use in Canada
- Control switches for System Acknowledge, Signal Silence, Drill, and Reset
- Control switches can be independently enabled or disabled at the FACP
Sign In for Dealer Pricing
Sign In for Dealer Pricing
EOL-CRFL-EOLCR
Key Features
- Mounting Adapter offers maximum mounting efficiency with added usability
- Built with metal product material to offer longevity and great resistance to damage and deterioration
- Built with metal product material to offer great versatility and allow creativity and innovation in design and construction
Sign In for Dealer Pricing
Sign In for Dealer Pricing
ES-50XCFL-ES50XC
Key Features
- Listed to UL Standard 864, 10th edition
- Pre-installed IPOTS-COM Ethernet IP and POTS (Plain Old Telephone Service) Central Station Communicator
- Optional CELL-MOD or CELL-CAB-FL GSM Central Station Communicator over AlarmNet
Sign In for Dealer Pricing
Sign In for Dealer Pricing
CMF-300AFL-CMF300A
Key Features
- Built-in type identification automatically identifies these devices to the control panel.
- Internal circuitry powered directly by two-wire SLC loop. The CMF-300(A) module requires power (for horns, strobes, etc.).
- Integral LED"blinks" green each time a communication is received from the control panel and turns on steady redWhen activated.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
H365AFL-H365A
Key Features
- Two-wire SLC loop connection
- Unit uses base for wiring
- Addressable by device
Sign In for Dealer Pricing
Sign In for Dealer Pricing
C2WTR-BAFL-C2WTRBA
Key Features
- Easy Installation
- Intelligence
- Instant inspection
Sign In for Dealer Pricing
Sign In for Dealer Pricing
BG-12LAOFL-BG12LAO
Key Features
- Aesthetically pleasing, highly visible design and color.
- Attractive contoured shape and light textured finish.
- Meets ADA 5 lbs maximum pull-force.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
BG-12FL-BG12
Key Features
- Aesthetically pleasing, highly visible design and color
- Meets ADA & 5 lbs maximum pull-force
- Easily operated (single- or dual-action, model dependent), yet designed to prevent false alarmsWhen bumped, shaken, or jarred
More Options Available
Sign In for Dealer Pricing
More Options Available
Sign In for Dealer Pricing
I300AFL-I300A
Key Features
- Directly powered by SLC loop without the need for external power
- LED that blinks to indicate normal conditions and turns solidWhen short circuit conditions are detected
- High noise i mmunity
Sign In for Dealer Pricing
Sign In for Dealer Pricing
H365RAFL-H365RA
Key Features
- Two-wire SLC loop connection
- Designed for direct-surface or electrical-box mounting
- Integral communications and built-in device-type identification
Sign In for Dealer Pricing
Sign In for Dealer Pricing
B501-WHITEFL-B501WHITE
Key Features
- Bases enable quick and secure detector plug-in
- SEMS screws provide easyWiring connection
- Support for 12-24 AWG provides installation flexibility
Sign In for Dealer Pricing
Sign In for Dealer Pricing
D2AFL-D2A
Key Features
- Photoelectric, integrated low-flow technology
- Air velocity rating from 100'/min to 4,000'/min (0.5 m/s to 20.32 m/sec)
- Versatile mounting options in square or rectangular configuration with modular construction
Sign In for Dealer Pricing
Sign In for Dealer Pricing
MDF-300AFL-MDF300A
Key Features
- Built-in identification automatically recognizes this device as a monitor module
- SEMS screws with clAing plates for & easierWiring
- LED that flashes green during normal states, and turns a solid red during an alarm
Sign In for Dealer Pricing
Sign In for Dealer Pricing
H365RA-IVFL-H365RAIV
H365RA-IV|FL-H365RAIV
Key Features
- Modern, sleek design for aesthetics and performance
- Advanced thermal technologies for optimal detection
- Compatible with FireLite's addressable fire alarm control panels
Sign In for Dealer Pricing
Sign In for Dealer Pricing
CRF-300AFL-CRF300A
Key Features
- Built-in typeidentification automatically identifies these devices to the control panel.
- Internal circuitry and relay powered directly by two-wire SLC loop.
- Integral LED"blinks" green each time a communication is received from the control panel and turns on in steady redWhen activated.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
BB-2FFL-BB2F
Key Features
- Six addressable Class B or three addressable Class A initiating device circuits
- Mount one or two modules in a BB-2F cabinet
- Mounting hardware included
Sign In for Dealer Pricing
Sign In for Dealer Pricing
CR-135MPFL-CR135MP
Key Features
- Dual Action (Rate of Rise/Fixed Temperature) or Fixed Temperature only.
- Available with protective light hazard guard (specify “MPG”When ordering).
- Up to 70’ inter detector spacing.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
BAT-1270-BPFL-BAT1270
Key Features
- Lead Acid battery chemistry to better suit your requirements with maximum productivity
- Proprietary Battery Size battery size for better reliance and optimal performance
- 12V DC battery - Ensures a steady and uninterrupted supply to your fire alarm control panel
Sign In for Dealer Pricing
Sign In for Dealer Pricing
D4120AFL-D4120A
Key Features
- Photoelectric, integrated low-flow technology.
- Air velocity rating from 100'/min to 4,000'/min (0.5 m/s to 20.32 m/sec).
- Versatile mounting options in square or rectangular configuration with modular construction.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
BB-26FL-BB26
Key Features
- Used to mount up to two 12V DC, 26AH batteries
- Knockouts are provided to facilitate various installation options
- Contains a dead-front panel is supplied with backbox and 2 self-threading screws
Sign In for Dealer Pricing
Sign In for Dealer Pricing
BAT-12180-BPFL-BAT12180
BAT-12180-BP|FL-BAT12180
Key Features
- Lead Acid battery chemistry to better suit your requirements with maximum productivity
- Proprietary Battery Size battery size for maximum productivity with added dependability
- 12V DC battery - Ensures a steady and uninterrupted supply to your fire alarm
Sign In for Dealer Pricing
Sign In for Dealer Pricing
TR-CEFL-TRCE
Key Features
- Used for semi-flush mounting
Sign In for Dealer Pricing
Sign In for Dealer Pricing
C2W-BABK-C2WBA
Key Features
- Plug-in detector line - mounting base included.
- LargeWire-entry port.
- In-line terminals with SEMS screws.
Sign In for Dealer Pricing
Sign In for Dealer Pricing