Resideo PRODCM Module de capture de composeur pour LTEM-PA et LTEM-PV Advanced Modular Communicator
PRODCM
|PRODCM
Resideo PRODCM Module de capture de composeur pour LTEM-PA et LTEM-PV Advanced Modular Communicator
PRODCM | PRODCM
Veuillez vous connecter pour voir les tarifs, consulter la disponibilité des produits et ajouter des articles à votre panier.
Aperçu
PRODCM is an optional Dialer Capture Module for control panels that sends Contact ID alarm signals via the control panel's dialer. PRODCM is used for control panels that do not support Resideo ECP data communication, sending Contact ID alarm signals via the control panel's TELCO dialer. The Dialer Capture Module replaces the phone line and simulates the phone service to the control panel. The alarms are then sent to AlarmNet for routing to the central monitoring station. Compatible Communicators include the LTEM-PV and LTEM-PA.
Principales caractéristiques
- Dialer operation is set for DTMF Tone Dialing for each phone number (pulse dialing is not supported and must be disabled in the control panel)
- PABX field is disabled (the Dialer Capture module does not communicate through a PABX)
- Phone numbers and account numbers are programmed (to ensure the maximum number of messages can be transmitted to the central station before a communication failure occurs, ensure the control panel is programmed with a primary and secondary central station number)
- Report format is set to Contact ID for each phone number
- The maximum number of retry attempts is programmed
- Desired zone and partition reports are enabled.
Renseignements généraux
Spécifications
ADI Numéro du produit PRODCM Application/utilisation Sending Contact ID alarm signals via the control panel's TELCO dialer Code fabricant PRODCM Fabricant Resideo Marque Resideo Modèle de produit PRODCM Nom de produit PRODCM Dialer Capture Module Pays d'origine MX Type de produit Speech Dialer
Compatible avec Control Panel Platforms Supported AlarmNet360
Temperature Minimale d'Opération 32°F
Largeur 1.2"
Alimentation Entrée CA Tension d'entrée 3.8V DC
Longueur 2.6" Type d'installation Hybride (à monter soi-même par un professionnel)
Compatibilité LTEM-PA, LTEM-PV Informations complémentaires Sending Contact ID alarm signals via the control panel's TELCO dialer