Product Overview
The WIO10 0 Input/Output s module is one of the removable communication modules that can be
installed on the W panel.
The WIO100 module has one programmable input and two programmable outputs.
WIth this module, the W panel can be connected to wired devices such as :
- Panic buttons, temperature sensors, safety light curtains, wired door contacts, glassbreak, shock, flooding or gas detectors (wired input).
- Flashing lights, spotlights, smoke equipment, light or sound indicator (wired output).
The programmable input can be configured as normally open (NO) or normally closed (NC), it can also be
supervised in order to detect cable tampers.
With the Mapping, the programmable input can be set up to take a 10 second video from any Videofied® Motion Viewer™ when the detector linked to the programmable input is triggered.
The programmable input can also be wired to an existing alarm system in order to add video-vérification. That mode is called XTENDER mode.
Programmable outputs are normally open drys contacts that close when the output is activated.
General Information
Name : Videofied WIO100 Input/Output Module for W-Series Panels , Videofied
Category : Alarm Communicator Modules
UPC Code : 857788006041
Country of Origin : France. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : CL-WIO100
Brand Name : Videofied
Manufacturer : RSI Video Technologies
Manufacturer Part Number : WIO100
Product Name : W Panel Input/Output Board
Product Type : Communication Module
Technical Information
Device Supported : Control Panel
Physical Characteristics
Color : White
Miscellaneous
Additional Information : <ul> <li>Simple one-screw attachment to the W panel motherboard </li> <li>End of line supervision </li> <li>Mapping ability: set up the system to have a MotionViewer take a short video clip when a programmable input is triggered</li> </ul>
Compatibility : W Panel
Environmental Certification : WEEE
Environmentally Friendly : Yes
