Protech
Filter Results
Showing 85 - 105 of 105
content loaded
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
XL-MINISOUNDER|PK-MNSOUNDER
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SDI-77XL-HS-H|PK-SD77XLHSH
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SDI-77XL2-APPK-SDI77XL2A
Key Features
- Nominal Input Voltage: 12/24 VDC; Power Consumption 1.1 Watts (LEDs off)
- 90 x 50 ft. (30m x 18m)
- NC Tamper , NO/NC Dry Contact Relay Form C; Solid State Rating 100mA / 50 V
Sign In for Dealer Pricing
Sign In for Dealer Pricing
30742203CPK-30742203C
Key Features
- Maximum detection range of 656 feet (200 m) for reliable perimeter coverage across extended distances
- Available tower heights: 6.5 ft. (2 m) and 10 ft. (3 m) to accommodate varying site security requirements
- Four alarm outputs per tower: Intrusion, Disqualification, Tamper, and Anti-climbing via dry contact relays (NC, 30 VDC, 1A)
Sign In for Dealer Pricing
Sign In for Dealer Pricing
PH-6PK-PH6
Key Features
- Adjustable ladder/tower mounting system built specifically for PIRAMID LT directional sensors.
- Fits ladder widths from 1.5" to 4" and structural thickness up to 2.5" for versatile installation.
- Two-arm, clamping-plate design provides secure, vibration-resistant attachment to ladder rails.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
LENS CPK-LENSC
Key Features
- Replacement PIR lens for PIRAMID motion sensors when original lens is damaged
- Narrow-angle coverage supporting 125ft. x 20ft. detection pattern
- Ideal for long-range corridor and narrow area protection
Sign In for Dealer Pricing
Sign In for Dealer Pricing
XL-MINISOUNDERPK-MNSOUNDER
XL-MINISOUNDER|PK-MNSOUNDER
Key Features
- Standard audible walk tester supplied with most PIRAMID sensors, providing clear tone-based detection confirmation during commissioning.
- Compact, lightweight design allows technicians to perform walk tests efficiently without adding bulk to the installation.
- Instant audible feedback helps verify sensor alignment, range, and detection pattern accuracy during setup and maintenance.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SDI-76M-HS1PK-SDI76MHS1
Key Features
- Nominal Input Voltage: 12/24 VDC; Power Consumption 1.1 Watts (LEDs off)
- 50 x 50 ft.(15m x 15m)
- NC Tamper , NO/NC Dry Contact Relay Form C; Solid State Rating 100mA / 50 V
Sign In for Dealer Pricing
Sign In for Dealer Pricing
30621502PK-30621502
Key Features
- Mounting Bracket offers maximum mounting efficiency with added usability
- Wall application/usage allows adaptability with easy installment
Sign In for Dealer Pricing
Sign In for Dealer Pricing
LENS C-PETPK-LENSCPET
Key Features
- Replacement PIR pet-immune lens for PIRAMID motion sensors when original lens is damaged
- Narrow-angle coverage supporting 125ft. x 20ft. detection pattern
- Pet-immune design reduces false alarms caused by animals
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SDI-77XL-HS-HPK-SD77XLHSH
SDI-77XL-HS-H|PK-SD77XLHSH
Key Features
- Nominal Input Voltage: 12/24 VDC; Power Consumption 1.1 Watts (LEDs off)
- 90 x 50 ft. (30m x 18m)
- NC Tamper , NO/NC Dry Contact Relay Form C; Solid State Rating 100mA / 50 V
Sign In for Dealer Pricing
Sign In for Dealer Pricing
LENS B-PETPK-LENSBPET
Key Features
- Replacement pet-immune PIR lens for PIRAMID motion sensors when original lens is damaged
- Medium-angle coverage with 100ft. x 35ft. detection pattern
- Pet-immune design filters out motion from small animals to reduce false alarms
Sign In for Dealer Pricing
Sign In for Dealer Pricing
30742204CPK-30742204C
Key Features
- Maximum detection range of 656 feet (200 m) per face for reliable perimeter coverage across extended distances
- Double face (DF) configuration with 4 infrared cells per direction enables corner protection and 90° perimeter coverage from a single tower
- Four alarm outputs per tower: Intrusion, Disqualification, Tamper, and Anti-climbing via dry contact relays (NC, 30 VDC, 1A)
Sign In for Dealer Pricing
Sign In for Dealer Pricing
40670204PK-40670204
Key Features
- Built-in surge protection to safeguard control unit and sensors from electrical damage
- Crossover and termination mode for flexible end-of-line configurations
- Pass-through switch option for seamless cable continuation
Sign In for Dealer Pricing
Sign In for Dealer Pricing
PH-4EXWLMTPK-EXWLMT
Key Features
- EX sensor wall-mounting solution designed for PIRAMID EX housings (e.g., SDI-77XL2-EX) for hazardous-location deployments.
- Complete kit includes swivel base, steel mounting plate with shaft, bolts, washers, and Allen keys for professional installation.
- 360° swivel / 90° pivot adjustment enables precise sensor aiming after mounting.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
PH-4PK-PH4
Key Features
- Supports 1.5" to 4.5" pole diameters for broad installation compatibility
- Rugged dual-bracket construction for stable, long-term mounting of 2 sensors
- Complete hardware kit for fast, professional installation
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SDI-76XL2PK-SDI76XL2
Key Features
- Nominal Input Voltage: 12/24 VDC; Power Consumption 1.1 Watts (LEDs off)
- 50 x 50 ft.(15m x 15m)
- NC Tamper , NO/NC Dry Contact Relay Form C; Solid State Rating 100mA / 50 V
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SDI-77XL2-EX-INDPK-77XL2EXI
Key Features
- Nominal Input Voltage: 12/24 VDC; Power Consumption 1.1 Watts (LEDs off)
- 100 ft. x 40 ft. (30m x 13m)
- NC Tamper , NO/NC Dry Contact Relay Form C; Solid State Rating 100mA / 50 V
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SDI-77XL2-ABCPK-77XL2ABC
Key Features
- Nominal Input Voltage: 12/24 VDC; Power Consumption 1.1 Watts (LEDs off)
- 90 x 50 ft. (30m x 18m); 100 ft. x 40 ft. (30m x 12m); 125 ft. x 20 ft. (38m x 6m)
- NC Tamper , NO/NC Dry Contact Relay Form C; Solid State Rating 100mA / 50 V
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SDI-77XL2PK-SDI77XL2
Key Features
- Nominal Input Voltage: 12/24 VDC; Power Consumption 1.1 Watts (LEDs off)
- 90 x 50 ft. (30m x 18m)
- NC Tamper , NO/NC Dry Contact Relay Form C; Solid State Rating 100mA / 50 V
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SDI-77XL-MIL-DPK-77XLMILD
Key Features
- Nominal Input Voltage: 12/24 VDC; Power Consumption 1.1 Watts (LEDs off)
- 100 ft. x 10 ft. (30m x 3m)
- NC Tamper , NO/NC Dry Contact Relay Form C; Solid State Rating 100mA / 50 V
Sign In for Dealer Pricing
Sign In for Dealer Pricing
PH-4APK-PH4A
Key Features
- Supports 4.5" to 8.5" pole diameters for broad installation compatibility
- Rugged dual-bracket construction for stable, long-term mounting of 2 sensors
- Complete hardware kit for fast, professional installation
Sign In for Dealer Pricing
Sign In for Dealer Pricing
40670002PK-40670002
Key Features
- Integrated solar panel with battery pack for fully autonomous, infrastructure-free operation at the perimeter
- Advanced accelerometer-based intrusion detection algorithm that filters environmental disturbances from wind, rain, and vehicles to minimize nuisance alarms
- Up to 656 ft (200 m) of fence-mounted detection coverage per control unit with 40 sensors per cable
Sign In for Dealer Pricing
Sign In for Dealer Pricing