Fire-Lite Alarms by Honeywell
Filter Results
Showing 29 - 56 of 242
content loaded
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- ANN-I/O connects to the ANN-Bus terminal on the FACP and requires minimal programming
- Each ANN-I/O module drives up to 40 LEDs
- programmable to indicate activity for points or zones
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Xenon strobe light source
- Flash rate 60 fpm
- Suitable for use in indoor and outdoor applications
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- ConcealedWiring
- UL-Listed door holder
- Total floor space required: 6-5/8" (168 mm)
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Durable extruded aluminum construction
- Attractive low-profile design
- Standard single-gang mounting
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- LED viewing hole on top of the steel enclosure’s cover
- Terminal strip fieldWiring connections, mounting track, and hardware
- Steel enclosure with removable front cover
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Directly powered by SLC loop without the need for external power
- LED that blinks to indicate normal conditions and turns solidWhen short circuit conditions are detected
- High noise i mmunity
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Dual Action (Rate of Rise/Fixed Temperature) or Fixed Temperature only.
- Available with protective light hazard guard (specify “MPG”When ordering).
- Up to 70’ inter detector spacing.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- All models support 12V DC, 24V AC/V DC, or 120V AC.
- Improperly applied voltage does not damage the unit.
- Spacing kit for odd angles.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Low profile design
- Dual action (rate of rise/fixed temperature) or fixed temperature only
- White plastic housing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Listed to UL Standard 864, 10th edition
- Pre-installed IPOTS-COM Ethernet IP and POTS (Plain Old Telephone Service) Central Station Communicator
- Optional CELL-MOD or CELL-CAB-FL GSM Central Station Communicator over AlarmNet
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Lead Acid battery chemistry to better suit your requirements with maximum productivity
- Proprietary Battery Size battery size for better reliance and optimal performance
- 12V DC battery - Ensures a steady and uninterrupted supply to your fire alarm control panel
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Photoelectric, integrated low-flow technology.
- Air velocity rating from 100'/min to 4,000'/min (0.5 m/s to 20.32 m/sec).
- Versatile mounting options in square or rectangular configuration with modular construction.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Low profile design
- Dual action (rate of rise/fixed temperature) or fixed temperature only
- White plastic housing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Three programmable Form-C relays
- programmable Make or Break Ratio
- Optional Trim Ring TR-CE (red) for semi-flush mounting the cabinet
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Highly visible red enamel finish
- Single action pull lever design
- Optional dual action lever kit
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Two-wire SLC loop connection
- Unit uses base for wiring
- Addressable by device
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Temporal and non-temporal tones
- Accelerated silence test feature on silenceable models
- Mounts to a single-gang backbox
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Pre-installed IPOTS-COM Ethernet IP and POTS (Plain Old Telephone Service) Central Station Communicator
- Auto-programming (learn mode) reduces installation time. Reports two devices set to the same address
- Two independently programmable, built-in Style Z (Class A) or Style Y (Class B) NAC circuits
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Two-wire SLC loop connection
- Designed for direct-surface or electrical-box mounting
- Integral communications and built-in device-type identification
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Used to mount up to two 12V DC, 26AH batteries
- Knockouts are provided to facilitate various installation options
- Contains a dead-front panel is supplied with backbox and 2 self-threading screws
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Compatible with MPS-950B Series
- Non-coded manual fire alarm use
- Surface-mount design
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Dimensions Door 24.0" wide x 12.632" high, x 1.25" deep, hinged at bottom
- Backbox 24.0" wide x 12.550" high x 5.218" (13.2537 cm) deep.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- MMF-300(A) is a standard-sized module that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices.
- MMF-301(A) is a miniature monitor module a mere 1.3" (3.302cm) used to supervise a Style B (Class B) circuit of dry-contact input devices.
- MMF-302(A) is a standard-sized module used to monitor and supervise compatible two-wire, 24 volt, smoke detectors on a Style D (Class A) or Style B (Class B) circuit.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Mounting Box offers a dependable mounting solution with maximum productivity
- Built with metal product material to offer high strength and durability
- Surface application/usage for better dependability with added efficiency
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- All models support 12V DC, 24V AC/V DC, or 120V AC
- Improperly applied voltage does not damage the unit
- Spacing kit for odd angles
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Built-in type identification automatically identifies this device as a monitor module to the control panel
- Powered directly by two-wire SLC loop. No additional power required
- High noise (EMF/RFI) i mmunity
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Low profile design
- Dual action (rate of rise/fixed temperature) or fixed temperature only
- White plastic housing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Key Features
- Built-in identification automatically recognizes this device as a monitor module
- SEMS screws with clAing plates for & easierWiring
- LED that flashes green during normal states, and turns a solid red during an alarm
Sign In for Dealer Pricing
Sign In for Dealer Pricing



























